I took the forks apart to get them straightened and when I went to put them back together I noticed what I would call top out springs were missing. The parts diagram calls them return springs. Does anyone know if I can get these someplace? Or should I hunt down a used set of forks? They are 32mm off my 73 jackpiner.
73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r
The springs on the top of the damping rods?
By the diagram in my manual, they slide on the damping rod and then the rod goes into the fork tube and bolted in.
73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r