Print Page - Wanted: Wassell Fork Cap

Title: Wanted: Wassell Fork Cap
Post by: Dennis Jones on January 08, 2015, 10:11:11 PM

I'm in need of a Metal Profile fork cap for a Penton/Wassell trials bike.Anyone have one they can part with?

Thanks,

Dennis Jones

Title: Wanted: Wassell Fork Cap
Post by: gooddirt on January 08, 2015, 10:23:33 PM

speed and sport was selling off wassell parts in lots on ebay a few years ago. Up to four at a time to someone.

Title: Wanted: Wassell Fork Cap
Post by: Dale Fisher on January 09, 2015, 10:13:05 AM

Dennis,
I'll check Ebay.uk to see if anything turns up on metal profiles. You could try an inquiry to the Greeves folks.

http://www.greevesmotorcyclesltd.com/forks.html

Dale Fisher
Penton Owners Group - Memberships
Mudlark Registry
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
'98 HP-14 Hi-Point
And some silly other bikes...

Title: Wanted: Wassell Fork Cap
Post by: Lew Mayer on January 09, 2015, 03:53:23 PM

I'll check, Dennis. Remind me in an e-mail if I forget.

Lew Mayer

Title: Wanted: Wassell Fork Cap
Post by: firstturn on January 09, 2015, 03:57:55 PM

Dennis also check to see if you can find out who purchased Domi Racing inventory for this product.

Ron Carbaugh

Title: Wanted: Wassell Fork Cap
Post by: 3putt on January 09, 2015, 04:35:34 PM

Hi Dennis, My used inventory sheet says I have one. Why don't you send me your mail address and I'll try to get to it this evening. Regards, Nelson McCullough

Title: Wanted: Wassell Fork Cap
Post by: Dennis Jones on January 09, 2015, 06:35:52 PM

Thanks Guys,

Not thinking I would need them I've passed most of my Wassell parts on. While snugging this cap up the outer ring just popped off.

Lew or Nelson if one of you guys have one that would be great. Nelson if the email from the board is now working you'll get an email from it, if not mine is [email protected]

Dennis Jones

Title: Wanted: Wassell Fork Cap
Post by: 3putt on January 09, 2015, 10:07:14 PM

Hi Dennis, After getting them out, they must be for Tyran as they have Standard NUT fitting on top, and Wassells have a round crown with a hole to use for tightening. Sorry for the false alarm. The cap and threads however appear to be the same to me. Nelson

Title: Wanted: Wassell Fork Cap
Post by: Glenn Berry on January 10, 2015, 09:28:27 AM

Dennis, I will also take a look, are these for a rider or a restoration?
Glenn /

Glenn Berry

Title: Wanted: Wassell Fork Cap
Post by: 3putt on January 11, 2015, 07:40:13 PM

Hi Dennis, GOOD NEWS!! I did find one, and have it packaged up and going to the address you provided me. Regards, W Nelson McCullough

Title: Wanted: Wassell Fork Cap
Post by: Dennis Jones on January 12, 2015, 12:05:37 PM

Thanks Nelson,

Once again the POG to the rescue :D

Dennis Jones

Title: Wanted: Wassell Fork Cap
Post by: hotrod392 on January 17, 2015, 02:46:22 PM

Since everyone is checking their Wassell inventory, I could use a set of rust free fork tubes or complete forks for a Penton Mudlark if anyone has some laying around.

Thanks
Shane
[email protected]
270-779-5070

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dennis Jones on January 08, 2015, 10:11:11 PM