Print Page - 74 -125 swing arm

Title: 74 -125 swing arm
Post by: Vince V on January 22, 2015, 09:28:20 PM

I am working on a 74 125. On the inside of the right side of the swing arm there should be a tab ( mine either broke off or prior owner cut off) that angles in toward the wheel and then up ( with a hole at the top ) which I believe attaches to the chain guard. Can some one give me the dimensions of the tab?? I need to fabricate this piece.

Thanks
Vince

Title: 74 -125 swing arm
Post by: KJDonovan on January 23, 2015, 08:37:26 AM

Vince,

I am pretty sure I have a junk swingarm around here somewhere with that bracket still intact. When I get out to the shop this weekend I will take a look. If it's there, I'll chop it off and mail it to you. If not I will make up a template so you can fabricate one. Just shoot me an email with your address.

Thanks,

Kevin

Title: 74 -125 swing arm
Post by: Vince V on January 23, 2015, 10:18:28 AM

Thanks Kevin

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Vince V on January 22, 2015, 09:28:20 PM