Print Page - OT - Post Vintage KTM Frames

Title: OT - Post Vintage KTM Frames
Post by: KJDonovan on January 25, 2015, 06:00:08 PM

Little off topic, but I figured this was the best place to ask. Got a question on post vintage KTM frames. I have the bones of a bike, Frame, TTrees, WP Forks, Swingarm, Mono-Shock, Pipe and a few other bits and pieces, but no motor that I know are from a 1988, frame serial number starts with 87*06. What I don't know is, was KTM still using a single frame style and size for multiple models in 88? Trying to figure out what motors will work on this frame, 250, 350, 500? Ideas?

Thanks,

Kevin

Title: OT - Post Vintage KTM Frames
Post by: Mike Lenz on February 03, 2015, 11:47:45 AM

Kevin,
I only have books up to 84, but IM pretty sure in 88 all three engines had different mountings. Even in 84 they all three were different.
Mike

Title: OT - Post Vintage KTM Frames
Post by: ALB on February 06, 2015, 04:53:35 PM

In checking my parts list
For Dec-1986 1 frame for 125Mx and Enduro
for Nov - 1986 1 frame for 240-250 MX and Enduro
for Nov - 1986 1 frame for 350 MX and Enduro and 500 MX

for Jan - 1988 parts list for the 240-250-350-500
1 frame for 250 MX
1 frame for 250 Enduro
1 frame for 350/ 500
1 frame for 250/ 500 MX
1 frame for 250/ 350 Enduro
I don't have a 1988 parts list for the 125.

Alan Buehner

Title: OT - Post Vintage KTM Frames
Post by: KJDonovan on February 07, 2015, 04:51:21 PM

Thanks Mike and Al. I guess I have to take a look and see if there is a part number on the frame anywhere to determine what size it is.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: KJDonovan on January 25, 2015, 06:00:08 PM