Have a small crack in the axle clamp on left leg. Anyone have spare fork bottom to suit for sale?
I just usually have mine Magnesium welded. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Hi Mike
I am experienced in Magnesium welding and have the equipment in my shed. How do they stand up once welded? I just assumed they crack again?
The small pinch bolts should only be snug, most get over tightened which cause the cracking. You should "V" out the cracks before welding and they should be OK. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
You might want to slide the axle in there to be sure it is set correctly.....
Quotequote:Originally posted by 454MRW
The small pinch bolts should only be snug, most get over tightened which cause the cracking. You should "V" out the cracks before welding and they should be OK. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Penton 175 XC
1979 KTM 175 GS