Print Page - Trade for some 1980 NOS parts?

Title: Trade for some 1980 NOS parts?
Post by: Mike Lenz on March 01, 2015, 05:01:48 PM

There are some rare items I need and I have some NOS items to trade for some of the stuff I need. I will also buy the items I need if you prefer money...and I can afford it. The NOS pieces i have are a seat, MX fuel tank, and rubber fork gaiters. The fuel tank is not perfect, a little scratched up, if up close. A few feet away it looks fine. I will email good picts. All 1980 items. These items will fit on all 79-81 KTM models. I may just wind up using them, but I hate to use NOS items on a rider. It just seems wrong. Once its used its gone forever.
I also have the following items for trade/sale:
76 Windsor orange GS tank with petcocks
76-77 Windsor orange MC-5 tank with petcock.
77 OEM 125/175 GS-6 tank (little use)
77 Windsor 250/400 GS-6 tank with petcocks
84 125 (&250?) NOS mx tank
Nice 73 250 frame
Nice GS-6 frame
Nice 77 MC-5 frame with duel foot peg mounts, and pegs I reinforced
73 175 ex pipe modified to fit a GS-6 frame
76-77 MC-5 ex pipe with spark arrestor
84 NOS 125 mx pipe
GS-6 seat base and good foam
35mm Ceriani leading axle forks, 9" travel

I am looking for the following:
a 49.75mm 70-75 Sachs piston
A 56mm 76-83 ktm piston
a 64.5mm 77-80 ktm piston
A 68 125 airbox cover
a 74-75 nice 175 ex pipe
a 77-80 175 cylinder usable with a 64mm piston max
a 77-80 175 exhaust manifold
a 78-80 usable 125/175 mx ex pipe
a 79-80 airbox {all 79 models and 175/250 1980)
a 81 250 cylinder usable with a 72.5mm piston max
a 81 mx fuel tank. Some browning ok, will use a DC cover, but cover will not fit a 80 tank.
a 81 250 swingarm

So if your into making a 79-81, are interested in my parts, and have some of this to trade, let me know. I know Gary Ellis has a couple of these items Ive already talked to him about. Gary, give me a call if interested. Gary, did you get my phone message about the exhaust end cap?
Thanks
Mike

Title: Trade for some 1980 NOS parts?
Post by: Bill Campbell on March 02, 2015, 06:45:37 AM

Mike,I'm interested in buying the GS6 seat and the MC5 pipe. Can you post or email photos and also let me know the cost plus shipping to Oz.
Cheers Bill

Title: Trade for some 1980 NOS parts?
Post by: pketchum on March 03, 2015, 08:38:51 PM

Mike,

I have both the 175 exhaust pipe and the airbox. Pretty sure the 250 airbox will fit the 175. I don't have the rod or plastic filter brace though. Just the box and the airfilter cage. The OD on the cylinder side of the pipe is - 40mm. I thought it might fit my 250 KTM but it doesn't so it must be a 175 pipe.

(http://i211.photobucket.com/albums/bb255/ketchum57/F01D01D5-964B-4873-A730-3F2FD2F719F9_zpsnky7ydxx.jpg)
(http://i211.photobucket.com/albums/bb255/ketchum57/49FA6D52-006E-4CD0-88B6-54113CE99831_zpspdmd2vtl.jpg)
(http://i211.photobucket.com/albums/bb255/ketchum57/7E5163C4-37D8-4428-892A-8D4A5782392E_zpsnllhaerc.jpg)
(http://i211.photobucket.com/albums/bb255/ketchum57/17F829E6-0ACE-418B-8C1A-D34ABE1CB9B3_zpsbld96h0y.jpg?1425431515662&1425431522236)
(http://i211.photobucket.com/albums/bb255/ketchum57/EB70D89B-49BC-4EF2-8F90-3D88B6A6050C_zpsovtyw2xz.jpg?1425431515661&1425431522236)

Phil Ketchum
Wichita, KS

Title: Trade for some 1980 NOS parts?
Post by: DKWRACER on March 06, 2015, 01:20:22 PM

Hi Mike, I have a 7 fin 175 cyl at 63.50 mm., also an aluminum swing arm that might be for 81, can send pics of the s.a.
email: [email protected]
adios, Tom

Title: Trade for some 1980 NOS parts?
Post by: Mike Lenz on March 09, 2015, 08:51:34 PM

Phil, I have emailed you. Bill and Tom I will be in touch. Thanks alot for responding. I really appreaciate it.
Mike

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Mike Lenz on March 01, 2015, 05:01:48 PM