Print Page - 74 250 hare scrambler exhaust springs

Title: 74 250 hare scrambler exhaust springs
Post by: Rain Man on March 06, 2015, 05:50:30 AM

I need the exhaust springs from the header to the cylinder. I don't have the parts book so any suggestions as to where to purchase and the actual dimensions would be fine.
Thanks

Raymond
Down East Pentons

Title: 74 250 hare scrambler exhaust springs
Post by: KJDonovan on March 06, 2015, 08:50:48 AM

Ray,

Moose has the swivel springs which work really well and come in lots of sizes, just measure the distance between the clips on the pipe and clips on the exhaust manifold and subtract 3MM. Available in the Parts Unlimited catalog. If memory serves the 250 uses the 100MM springs, but you should probably measure first.

Length 57MM PN:M7714
Length 63MM PN:M7709
Length 67MM PN:M7710
Length 75MM PN:M7711
Length 83MM PN:M7712
Length 90MM PN:M7718
Length 95MM PN:M7719
Length 100MM PN:M7720

Thanks,

Kevin

Title: 74 250 hare scrambler exhaust springs
Post by: Rain Man on March 06, 2015, 09:36:05 AM

Thanks Kevin, this bikes been sitting all rebuilt for 2 years waiting for that exhaust spring!!

Raymond
Down East Pentons

Title: 74 250 hare scrambler exhaust springs
Post by: ALB on March 06, 2015, 10:25:47 AM

Hi Raymond,

I carry the exhaust springs in stock, in stainless steel.

Alan Buehner

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Rain Man on March 06, 2015, 05:50:30 AM