Penton Owners Group

General Discussion => Penton Talk => Topic started by: Scott Sappington on May 09, 2015, 04:08:53 PM

Title: clutch actuator arm assy
Post by: Scott Sappington on May 09, 2015, 04:08:53 PM
Installing a aftermarket actuator plate I purchased from Al B. with the upgraded bushing. The pin that holds the actuator arm (clutch arm) into the plate, is the pin installed from the outer side or inner (engine)side of plate or does it make a difference? Pricey part and don't need to make mistake on the installation. 74 250. Thanks, Scotty
Title: clutch actuator arm assy
Post by: KJDonovan on May 09, 2015, 04:46:15 PM
Scott,

From the inside to the outside.  Stop tapping when it is just below flush on the outside.

Thanks,

Kevin