Print Page - ceriani fork springs

Title: ceriani fork springs
Post by: Dave Withrow on May 28, 2015, 10:48:27 PM

I am looking for a decent set of fork springs for some 35mm ceriani straight leg forks for my 74.5 250. Thanks.

Big Dave

Title: ceriani fork springs
Post by: fastwillie8568 on May 29, 2015, 02:24:29 PM

Call me 330-774-4235

Title: ceriani fork springs
Post by: Dale Fisher on May 29, 2015, 04:11:42 PM

Dave,
Depending on your intended use there is another option to avoid possibly a sagging suspension with old weak spring steel. Race Tech will furnish replacements based on the bike and rider weight. They are typically short in length and the pre-load is done with a washer and pvc tube. They supplied me with some for my Triumph which were a little too soft initially and then exchanged them for another heavier set (with a little cost involved).

http://www.racetech.com/

Dale Fisher
Penton Owners Group - President/Memberships
Mudlark Registry
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
'98 HP-14 Hi-Point
And some silly other bikes...

Title: ceriani fork springs
Post by: Dave Withrow on June 05, 2015, 09:32:19 AM

Thanks to a fellow POGGER......I have forks springs......Thanks again Bill

Big Dave

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dave Withrow on May 28, 2015, 10:48:27 PM