Print Page - jackpiner clutch plates

Title: jackpiner clutch plates
Post by: Dale Sonnenschein on June 29, 2015, 08:49:29 PM

Is there anywhere I can buy new clutch plates for my 73 piner? The clutch works good but it rattles a lot. The ears on the plates are worn.

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r

Title: jackpiner clutch plates
Post by: KJDonovan on June 30, 2015, 07:53:21 AM

Dale,

I see some here. http://www.enduroklassiker.at/en/clutch-parts/2522-kupplungslamellensatz.html

Thanks,

Kevin

Title: jackpiner clutch plates
Post by: DKWRACER on June 30, 2015, 08:05:16 AM

Dale, if those are the sintered plates, I may have a set, will ck.
Tom Brosius
[email protected]

Title: jackpiner clutch plates
Post by: Dale Sonnenschein on June 30, 2015, 04:12:59 PM

Thanks guy's.
Tom, I'm not sure what I have or how to tell what I have. The clutch makes some noise. It looks like the two inner plates were changed as they look good and fit tight in the basket.The three outer plates have about 1/16" gap and you can see the ears are worn. I appreciate the help.

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r

Title: jackpiner clutch plates
Post by: DKWRACER on June 30, 2015, 08:31:19 PM

Dale I did locate three bronze colored plates (2.3 mm), I also have the fiber composite plates at 3.3mm thick ( angled pads)..
Tom Brosius

Title: jackpiner clutch plates
Post by: Dale Sonnenschein on July 01, 2015, 01:00:07 PM

Tom, I don't know what I have and I probably won't have time to take it apart to look before VMD. Can I contact you after VMD?

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r

Title: jackpiner clutch plates
Post by: DKWRACER on July 01, 2015, 01:32:58 PM

Yah, sure...Tom

Title: jackpiner clutch plates
Post by: 1973_ Jackpiner_175 on July 05, 2015, 06:11:39 PM

There is a complete set of metal and fiber on eBay; item number: 171819291623. Just cut and paste this in your search box.

Title: jackpiner clutch plates
Post by: gooddirt on July 06, 2015, 02:28:37 PM

most likey its the clutch bearing, they go out before most bearings a bit weak.

Title: jackpiner clutch plates
Post by: Dale Sonnenschein on July 06, 2015, 05:52:05 PM

So how do I check the clutch bearing? I had the case off a few weeks ago and I tried to wiggle the basket but it was tight.

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
82 husky wr430
10 ktm 250xc
02 bmw r1150r

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dale Sonnenschein on June 29, 2015, 08:49:29 PM