I have a couple of MC5's, a 400 and a 250. The 250 has an angled exhaust flange and the 400 is straight. was there a reason for the angle change on the different motor sizes? Can I run the angled flange on a 400?
Thanks,
Mike
Obviously you have to have the manifold matched up to the pipe you are using, but I have seen both styles, it just depended what was available at the time I think. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978 KTM 250'S
1975 Can Am 175 TNT 250 conversion
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico