With property taxes just around the corner, I am needing to sell some inventory that is just sitting around gathering dust at this point. I have a rebuilt engine (not for sale) that is destined to be used in this bike so I will be selling the engine in this bike that is a strong running engine, that probably needs new crank seals due to smoke from trans fluid as described from Jim Dale who I purchased it from in April, but the kick lever detent is broken and the lever does not stay stationary, not allowing it to be used to start the bike, but can be repaired. It probably needs a shifter fork or some internal part replaced, as it is described as not having or going into 5th gear. It has a 6 pole Motoplat rewired by Vance Smith. Sold with kick and shift lever with or without carb, it should make a good rebuild-able engine. PayPal preferred and delvery available. Asking $350 or best offer.
[email protected] 618-553-1346 Michael R. Winter Newton IL. 62448 Here is a link to the original post with pics of the bike and engine in question still in the bike as it sits today.
http://pentonusa.org/forum/topic.asp?TOPIC_ID=16137
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978 KTM 250'S
1975 Can Am 175 TNT 250 conversion
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico
Mike, I left a message on your ph. Call me about engine. Scott Sappington
Scott, I got your message, but the phone # was not clear. You can text me at 618-553-1346. My ph. reception is poor here. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978 KTM 250'S
1975 Can Am 175 TNT 250 conversion
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico