Still looking for the above. No powder coating please and thanks in advance!
Still looking Kip. I have a place in West Texas, but the guy doesn't know or can't identify what he has in frames. I will see when he is going to back at his ranch and run over and check it out.
Ron Carbaugh
Kip,
Have you checked with Charlie Richardson, "CR Performance", Fallbrook, CA, if there is one out this way he'll know. I need to contact him about my '73 250 CZ and could research if you like.
Victor
Thanks Ron and Victor for the help. Victor, yes if you don't mind, ask Charlie thanks!
Kip, I called Charlie already, he said he didn't have anything that wasn't modified.
Mike
Thanks Mike:)
Hi Kip,
You might try Robert Borg AKA "Bob's Vintage Products" in Utah. He has a large amount of CZ inventory. Would a '74 red frame work or do you specifically need the '75 and later "Falta" frame? Hope all is going well with you.
Clay
Clay I need a 75 Falta for a museum restoration, will try Bob, thanks!
Kip.
There is a fellow in San Clemente, CA who had a 100% first class CZ 400 Falta, he is very precise about his machines and a class guy, I am not sure if he is active, his name is John Lambert. He won the Elsinore Grand Prix in about 2004-5, vintage class of course on the bike. I bought a Six Day from him, in pieces, about 8 years ago and it was probably the fastest and best handling bike I've had.
I will ask about him this weekend at Glen Helen, as we are kicking off our Fall MX series.
I have a nice 73/74 CZ 250 red frame, fresh motor, with an up pipe available if there is interest.
Hope this helps.
Victor