This tank came with my 3 JackPiner purchase. The seller told me it was an aluminum Hi-Point tank. Can you guys please let me know your opinions and what bikes it fits.http://i1040.photobucket.com/albums/b401/timothyjcart/DSC02742_zpstda4iufj.jpg?1446417112553&1446417112798
Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3
you need a picture of the bottom/tunnel of the tank. that will show with certainty if it will fit a hi breather frame, as i suspect that it will. chi jer
I will post it tomorrow after work, thanks CJ. Tim
Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3
http://i1040.photobucket.com/albums/b401/timothyjcart/DSC02759_zps9few6wl4.jpg
Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3
it looks to me like it is a tank for a early 175, (1972) pre hi breather frame. it will not fit the later hi breathers, chi jer
As a newbie CJ, can you please educate as to a "hi breather". I see the term, but don't know what it is. Thanks, Tim.
Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3
The high breather had a square hollow frame backbone and the airbox intake was through it under the tank. The high breather requires a tank with a slightly wider channel than a non-high breather frame.
Brian
Thanks for the education guys.
Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3