Print Page - Penton Parts Rd1 updated

Title: Penton Parts Rd1 updated
Post by: Doug Knight on March 24, 2016, 12:10:46 AM

All prices plus shipping. Not much left update Friday afternoom

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1342_zpscxn8zfm8.jpg)
250 Elko1 71.25mm Pending
250 Elko2 71.50mm Pending
172 Jackpiner 64.mm sold

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1343_zpsstbjqzo1.jpg)
Ignition side covers
Full single sold
Cut version All sold

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1345_zpstthrnhzc.jpg)

Motoplats #1 9600162 short coil wire, this one works sold
#2 9600162-1 long coil wire sold

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1346_zpsnv3vy1nq.jpg)

Air boxes, these may fit other years, do your homework
'77 GS6 metal $65
'78 MC5 plastic $50

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1347_zpswnfdyouc.jpg)

Vintage Supertrap spark arrestor, need new mounting flange $40
extra tubes going with it.
Jackpiner, HareScrambler case guard sold
Jackpiner kickstarter sold
Short shifter pendiing
Long Original shifter with repair pending
New style clutch actuator with rod pending
High breather frame rubber cap sold

(http://i23.photobucket.com/albums/b360/10_Rounder/Penton%20Parts%20Sale/DSCN1344_zpskftt7iqy.jpg)

HareScrambler side panel Sold
Marzocchi 38mm triple tree $35
'78 clutch complete with ball bearing shaft, used older style actuator
and the plates are fiber(not metallic) sold

I do take paypal but not at this email
[email protected] this is my mobile email, use it first

Title: Penton Parts Rd1 updated
Post by: Bob Seymour on March 24, 2016, 10:19:44 AM

Doug,
I will purchase both the long and short shifters. I also may have a interest in the 71.25 250 cylinder. Do you know what year it is from? PayPal ok for payment? Thanks, Bob

Title: Penton Parts Rd1 updated
Post by: Cal Alexander on March 24, 2016, 11:21:51 AM

Doug, I'm interested in your 64mm cylinder and your full right side ignition cover. I'll send you an email. Thanks - Cal

Title: Penton Parts Rd1 updated
Post by: 454MRW on March 24, 2016, 12:27:30 PM

I would take the 2 bottom left ignition covers. [email protected] Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico

Title: Penton Parts Rd1 updated
Post by: Doug Knight on March 24, 2016, 02:23:42 PM

71.25 250 cylinder was off a '76 case that will be in the next round

Title: Penton Parts Rd1 updated
Post by: gooddirt on March 24, 2016, 03:35:11 PM

How about the 1973 250 yellow green air box cover?

Title: Penton Parts Rd1 updated
Post by: Doug Knight on March 25, 2016, 12:47:14 PM

Have responded to all inquires with emails, thanks Doug

Title: Penton Parts Rd1 updated
Post by: Mick Milakovic on March 26, 2016, 11:06:26 PM

Hi Doug, I would like the following:

250 straight manifold
250 angled manifold
rear axle
kickstand
kick lever
marzocchi shocks
71.50 cylinder
new style actuator

Thank you,
[email protected]

Mick

Title: Penton Parts Rd1 updated
Post by: Bob Seymour on March 27, 2016, 11:01:32 PM

Doug,
I did;nt recieve any email from you? My email is: [email protected] I will purchase the two KTM shift levers. PayPal will work for payment if thats suitable for you? Thanks, Bob

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Doug Knight on March 24, 2016, 12:10:46 AM