Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Larry Perkins on July 16, 2016, 08:03:13 PM

Title: Wheelbase
Post by: Larry Perkins on July 16, 2016, 08:03:13 PM
Anybody know what wheelbase a steel tanker had and a 74 125?  Thanks for any input.

Larry P
Title: Wheelbase
Post by: Mike Schulz on July 17, 2016, 08:27:18 PM
Hi Larry,
The wheel base (front axle to rear axle) of our 1970 steel tankers with stock swing arm and forks is 51 1/2 " -52 1/2 " depending on where the rear axle is in the swing arm slot. Don't have a 74 but do have a 1972 125 with stock swing arm and forks and the wheelbase is 55 1/2 "-56 1/2" depending on where the rear axle is in the swing arm slot. Hope this helps!
Mike Schulz
Title: Wheelbase
Post by: Larry Perkins on July 17, 2016, 08:40:26 PM
Big help, thanks Mike!  I am covered.

Larry P
Text only | Text with Images