Print Page - engine noise silencer for head

Title: engine noise silencer for head
Post by: john durrill on August 27, 2002, 08:21:26 AM

can any of you ISDT riders tell me what was used to silcence engine noise on cylinder heads? i have seen something that looks like wide rubber bands used in pistures. what material were the bands made from?
i need to add some to my 175/5 and the sons piner.
Thanks ,
john

Edited by - john durrill on 08/27/2002 09:26:32 AM

Title: engine noise silencer for head
Post by: rob w on August 27, 2002, 06:32:42 PM

Hi John, I am not a ISDT rider, but I used to play one. I used a 4.50 rear inner tube, cut apx. 1 1/2" wide, to stretch over the Sachs head, I don't know how that will work on a KTM. Give it a try. Bobby Uhl.

Title: engine noise silencer for head
Post by: john durrill on August 27, 2002, 07:14:13 PM

Thanks Bob,
i was hopeing something easy to find like that would work.
John & Peter

Penton Owners Group

General Discussion => Penton Talk => Topic started by: john durrill on August 27, 2002, 08:21:26 AM