I am selling off some of the extra parts that I have remaining. They are as follows:
Later 175/250/400 clutch cover restored - SOLD
Short 175/250/400 ignition cover - SOLD
Black motor full ignition cover restored - $90
Kick levers rechromed, tight, show condition:
Top lever - 17mm early design, no rubber - $100
2nd lever - 14mm early design w/ new repo rubber - SOLD
3rd lever - 17mm later design w/ orig good rubber - $125
4th lever - 17mm later design, no rubber - $120
(repo rubber available at CSM restorations)
Clutch actuator arm - very good - $75
Speedo drive unit marked 9.73 - very good - $50
73 Harescrambler exhaust shield - original paint - SOLD
73 Harescrambler airbox cover - original paint - SOLD
(both of these covers can be used to determine original paint colors)
Airbox filter screen - $20
Steeltanker Bing to manifold rubber bushing NOS - $10 each
Sachs steel clutchplates NOS - $20 for the set of 4
Sachs exhaust flange nuts NOS - $15 for the pair
Five large rubber rear drive bushings NOS - $20
Prices do not include shipping.
Please call for questions 251 946-3308 or email
[email protected](http://i38.photobucket.com/albums/e126/meat1/Parts%20For%20Sale/IMG_9199_zpskrts6oev.jpg)[/URL]
(http://i38.photobucket.com/albums/e126/meat1/Parts%20For%20Sale/IMG_9200_zpsxx4vkrro.jpg)[/URL]
Keith Meatyard
got any motor parts ? need spacer on left side of crank behind the gear. .
Quotequote:Originally posted by gooddirt
got any motor parts ? need spacer on left side of crank behind the gear. .
Larry, is this the thin spacer between gear and bearing? I have something in a bucket of engine parts that may be it. Do you know the OD, ID, and thickness?
Keith Meatyard