I bought a very hard foam unit from Seat Factory on eBay for my Harescrambler and like it very much. I want to do the same for the Short-Tall seat, but they don't make one. My question is are the Long-Tall an Short-Tall seat foams the same dimension except for length? If they are then all I have to do is cut the long seat down to the short seat dimensions. Thanks in advance,
Mick
I too had the same issue. I ended up making my own foam base for my 76 XC. It isn't hard to do.....
Quotequote:Originally posted by Mick Milakovic
I bought a very hard foam unit from Seat Factory on eBay for my Harescrambler and like it very much. I want to do the same for the Short-Tall seat, but they don't make one. My question is are the Long-Tall an Short-Tall seat foams the same dimension except for length? If they are then all I have to do is cut the long seat down to the short seat dimensions. Thanks in advance,
Mick
1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Penton 175 XC
1985 20' Hi Point trailer
The foam off eBay is from a 1977 seat foam mold, NOT the same long tall as Al's B sells . The 1977 foam fender inset is not as deep and not round at the rear edges.
Wow did not know that, thanks...