Print Page - Need Picture of 125

Title: Need Picture of 125
Post by: iliketoride on January 06, 2001, 10:52:20 AM

Does any body have a picture of a 72' 125 showing the portion of frame behind the seat that the fender attaches to?

Title: Need Picture of 125
Post by: iliketoride on January 06, 2001, 11:04:59 PM

also a picture or description of kick stand

Title: Need Picture of 125
Post by: Larry Perkins on January 07, 2001, 09:45:27 AM

I can probably dig a picture up if I hunt around. What are you trying to figure out about rear section? Kickstand on the 72 is unique to the Penton line. It didn't bolt on to the swingarm like on most Pentons. It ran through a sort of tube with bushings under the front of the swingarm. It was done and looks like an old bicycle kickstand when removed. It is my experience that this kickstand is a lot harder to come by than it's more common counterparts.

Title: Need Picture of 125
Post by: imported_n/a on January 07, 2001, 04:35:34 PM

I took some pictures of my '72 Six-Day. They should be at the following:

http://albums.photopoint.com/j/AlbumIndex?u=1440971&a=10814646

Title: Need Picture of 125
Post by: iliketoride on January 07, 2001, 09:40:37 PM

Great Pics Gary, My problem is that the "U" shaped portion of frame behind the seat had been cut clean off at some time, for what reason i'm not sure. I am trying to get an idea for reconstructing that portion.
Thanks Gary

Penton Owners Group

General Discussion => Penton Talk => Topic started by: iliketoride on January 06, 2001, 10:52:20 AM