Is it possible to still have the 400 head modification done? I'm not sure of the current status, but I figured while I have the pipe off, and I'm working on the carburetor, I should have it done.
I guess I should have clarified this to ask is there any way of contacting Penton Racing Products, are they still operating? There is no contact information on their site that I see. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico
Hey Mike;
Just sent you an email. Let me know what you find out.
Type at you later,
Dan McEntee
It is my understanding that Penton Racing Products has closed the doors.
Larry P
I thought I read something about that, but all I can find is where they were dropping the ignition parts and service. I wonder where the tool bit is, and if it could be sold or passed on to someone capable of doing the modification? Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico
RE-MX purchased Penton Racing Products from Jack Penton. Dan Gray purchased the assets.Not sure if he does additional machine work.We did ship our blanks to a machine shop in Amherst,Ohio.