Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Michele Tomat on October 08, 2017, 08:03:26 AM

Title: WTB clutch and ignition cover
Post by: Michele Tomat on October 08, 2017, 08:03:26 AM
Hi everyone, i'm looking for a clutch cover and an ignition cover for my  '73 250 HS ('72-'73 175 jackpiner covers are ok as well). If you have something to sell hit me up here.
Title: WTB clutch and ignition cover
Post by: Carl Hill on October 09, 2017, 07:02:30 AM
Pretty sure I have a set. Out of town right now but I will check when I get home Tuesday. Let me know your email or number and I will send you some photos.
Title: WTB clutch and ignition cover
Post by: Carl Hill on October 10, 2017, 12:39:15 PM
I found 2 clutch covers to fit the small diameter  kickstart shaft motors. Unfortunately 1 is cracked and the other has significant corrosion damage.
Title: WTB clutch and ignition cover
Post by: Michele Tomat on October 10, 2017, 01:23:02 PM
I wrote you an email yesterday. Can you please send me pictures of them?
Title: WTB clutch and ignition cover
Post by: DKWRACER on October 10, 2017, 02:56:59 PM
Hi, saw your post re: covers, on the clutch side , do you need 17mm bore for the kicker? Or 14mm, which I think is for 175cc mtrs>. I may have some covers.. Did you need the full length ignition cover, covers the c/s sprocket...etc..
Tom Brosius
[email protected]
Title: WTB clutch and ignition cover
Post by: Carl Hill on October 10, 2017, 06:36:44 PM
Photos sent
Title: WTB clutch and ignition cover
Post by: Michele Tomat on October 11, 2017, 04:52:17 PM
Check your email Carl.
Text only | Text with Images