Print Page - Wanted - 175 Piston or Cylinder

Title: Wanted - 175 Piston or Cylinder
Post by: PJM on May 23, 2018, 02:05:29 PM

Hello,

I am in need of a 64.5mm short style piston that fits the 1977 175 KTM motor with the 6 fin cylinder. Alternatively, I am in search of a 6 fin cylinder that fits this motor with a bore of 64mm or less. Does anyone have either of these or can recommend a source for me to contact?

Kind regards,
Pat

PJM

Title: Wanted - 175 Piston or Cylinder
Post by: LeeBuff on May 23, 2018, 02:40:23 PM

Hi Pat,

Have you checked with Al Buehner his # (216) 651-6559.

Good Luck, Lee

Title: Wanted - 175 Piston or Cylinder
Post by: PJM on May 23, 2018, 03:22:15 PM

Hello Lee,

Yes, Al was checked. He carries pistons up to 64 mm and has no 6 fin cylinders for the later model motors.

Thanks,
Pat

Title: Wanted - 175 Piston or Cylinder
Post by: DKWRACER on May 23, 2018, 07:38:00 PM

Hi, I might have both, will ck tomorrow...
Tom Brosius

Title: Wanted - 175 Piston or Cylinder
Post by: 454MRW on May 23, 2018, 08:43:02 PM

There is a .040 oversize piston on eBay, but doesn't include rings.
https://m.ebay.com/itm/NOS-Wiseco-Piston-O-S-0-40-1977-1982-KTM-Penton-Part-407P4/191573048314?hash=item2c9aa4bbfa:g:h8gAAOSwv0tVR8rk

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Penton
1976 MC5 400
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM's
1976-78 125-400 RM's
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

Title: Wanted - 175 Piston or Cylinder
Post by: DKWRACER on May 24, 2018, 12:30:21 PM

Piston found, Wiseco + .060 or close to 65mm.(short) comes with rings and the pin, will need one circlip (Al B. may have) If int...
[email protected]
Cyl. I have is 7 fin....
Adios , Tom Brosius

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: PJM on May 23, 2018, 02:05:29 PM