Print Page - 250 wiesco piston deck height

Title: 250 wiesco piston deck height
Post by: Richard Carlson on June 07, 2018, 02:09:55 PM

On my new piston it tells the ring gap but not the deck height.
In my manual for an original piston you are told to measure off the top of the L-ring (0.8mm-0.9mm) the Wiesco has square rings and a dif
ferent dimension from the top of the ring to the top of the piston.
I guess I could measure the difference and do the math. Just wondering if anyone has had a similar problem?

Title: 250 wiesco piston deck height
Post by: G Ellis on June 08, 2018, 09:04:27 AM

.053 is what I set them at. Top of the piston.

Title: 250 wiesco piston deck height
Post by: Richard Carlson on June 08, 2018, 11:18:41 AM

Thank you thats what my math came out to.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Richard Carlson on June 07, 2018, 02:09:55 PM