Print Page - Ceriani fork seals 35mm

Title: Ceriani fork seals 35mm
Post by: Jdbglover on September 20, 2002, 05:47:53 PM

http://www.chicago-rawhide.com/catalogs/457010/sealdetail.asp?s=13945

Are these the correct type and size seals? The local distributor will sell them for 3.94 each, this seems to be a good price. Is it?

Thank You

John

Title: Ceriani fork seals 35mm
Post by: BrianTaylor on September 20, 2002, 09:33:39 PM

John though these c/r seals do fit the hole and seal oil the lip pressure cannot exceed 15 /lbs pressure.... Front forks exceed this pressure and you will passs oil through them very shortly. The pricing is extremly attractive but they are not designed for the forks hydraulic application. I work for a bearing distributor and we sell c/r....i have tried before and know first hand they wont work.....spend the extra bucks and get the propper seals.... Brian Taylor

Brian Taylor

Title: Ceriani fork seals 35mm
Post by: Mike Lenz on September 22, 2002, 11:11:13 AM

yOUR DEALER CAN GET GOOD SEALS FROM pARTS uNLIMITED. Just give him the measurements

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Jdbglover on September 20, 2002, 05:47:53 PM