Hi all, What type of media should I use for cleaning up an aluminum head?
Thanks and Merry Christmas to all!!
Dale
Glass ((pearls) blasting gives the best result.
Then clean the cylinder head in ultrasonic with a mild soap solution.
It will look like a new one :)
https://photos.app.goo.gl/CWEZuayoiQxkRFi87
Can someone let me know if the "hyperlink" works?
I can't post direct photos via 'insert image" and the reference link at "google photos"[?][?]
I see the head picture.
Larry P
Glass pearl Fine 100-200 Mircrom
EMAG EM-404 Ultrasonic Alu cleaner
Perfect timing, I was just going to ask the same questions. Thanks for the info.
Was the head and cylinder originally painted from the factory? Also when I opened up my cases I noticed some type of epoxy was applied in the corners and around castings , anybody know if this was a factory thing as well?
Merry Christmas to all the POG members!!
Gary Ponce
As far as I know, there is no coating on the cylinder and head.
Koen
Thanks Koen, appreciate your response.
Epoxy is very normal, fills possible porosity in the castings. You can also try vapor blasting, leaves a nice original looking finish if done right, and is smudge proof. To artificially age after blasting, the parts can be run in a dishwasher with hot water for a couple hours, really works, I was amazed.