I am rim ignorant when it comes to motorcycles. Built many a bicycle wheel but will have these done by someone. Has anyone used these Pro Wheel rims and what do I need to order rim wise to have some built to Penton hubs? I have a gob of Original spokes but want to use stainless on this as it will be a racer. Anyway do I just need to tell them rim size and holes, supply them hub and they will figure it out or what? Thanks for guidance on this from the knowledgeable.
Larry P
I ordered some pro- wheel rims for XR-50 one time. Could not get the bead to seat. When I took the tires off I checked the diameter and found them to be greater that 10 inches. Hopefully this was just a fluke
Larry,
Save you self some aggravation and get a set of Sun or Excel from Buchanan's. They can supply the stainless spokes and nipples too.
Thanks,
Kevin
I ordered some pro- wheel rims for XR-50 one time. Could not get the bead to seat. When I took the tires off I checked the diameter and found them to be greater that 10 inches. Hopefully this was just a fluke
Larry,
Save you self some aggravation and get a set of Sun or Excel from Buchanan's. They can supply the stainless spokes and nipples too.
Thanks,
Kevin