Was the bolt up on the cylinder different on the early Jackpiners with an Amal than the manifold for a Bing? There is a POG member wanting to put a Bing on his bike and I thought you just had to change the manifild to do it but the one he has is different boltup than was the Amal manifold. Any help here appreciated.
Larry P
I believe they are the same.
Maybe the manifold he has is not from a 175 then because it is different than his original Amal one. Gary do you have one from a 175 that you could measure difference between bolts?
Larry P
Yes will send you some photos.
The Bing mount was spigot mount and the Amal was a flange mount to the carbs. To the cylinder they were the same.
RCG
Then he has the wrong Bing mount. Need to find a proper 175 one for him.
Larry P
Larry,
I have a NOS still in the package intake that I think is what you need. part # 52.30.050.000 is on the package and I looked in the parts book and from what I can see it is the correct one. Please check the number to confirm and if you have an interest let me know. It has a flange for the carb to slide onto and the other end has the 4 bolt holes.
[email protected] Paul
Will do Paul. It is for another member trying to get his bike sorted out and wants a Bing. Thanks!
Larry P