Print Page - Flywheel thread pitch and size Sachs

Title: Flywheel thread pitch and size Sachs
Post by: Brentb on March 17, 2019, 01:46:16 PM

Hello,

I just acquired a Sachs 1001/6B and missing the ignition. Upon closer inspection the threads are slightly damaged on the end of the crank.

It's left hand, measures M10 but fine threads

Anyone know if this is really an M10 and what the thread pitch is?

Thanks B.B.

Brent Banning

Title: Flywheel thread pitch and size Sachs
Post by: Rick Bennett on March 17, 2019, 04:47:22 PM

10 x 1.0 mm LH thread
Rick

Title: Flywheel thread pitch and size Sachs
Post by: Daniel P. McEntee on March 17, 2019, 07:14:44 PM

Get yourself a set of thread files, if you do not have any. Grainger's sells a set that covers just about everything standard and metric. Works on right and left handed threads. Especially handy for situations like a crank shaft end. well worth the money even if you only use them a few times a year, if you do all the work on your bikes, you need them.!!
Type at you later,
Dan McEntee

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Brentb on March 17, 2019, 01:46:16 PM