Print Page - Wanted Bing carb

Title: Wanted Bing carb
Post by: Rick Bennett on November 23, 2019, 07:00:47 PM

Guys
I am going to need a Bing V84 small body 1/28/511 standard mount carb for the Hiro project.
Rick Bennett
440-417-8094

Title: Wanted Bing carb
Post by: Larry Perkins on November 23, 2019, 07:22:11 PM

I have one but am in the hospital so it may be a couple of weeks before I can get to it for you Rick

Larry P

Title: Wanted Bing carb
Post by: Rick Bennett on November 23, 2019, 10:37:26 PM

Thanks Larry
Best of luck to you.
I am not sure the 28 is what I need as the spigot on my cylinder is 30 ID and 37 OD. From what I have seen carbs were 28 to 32 mm.
Rick

Title: Wanted Bing carb
Post by: Rick Bennett on November 23, 2019, 10:49:38 PM

Thanks Larry
Best of luck to you.
I am not sure the 28 is what I need as the spigot on my cylinder is 30 ID and 37 OD. From what I have seen carbs were 28 to 32 mm.
Rick

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Rick Bennett on November 23, 2019, 07:00:47 PM