Print Page - Hi-breather frames

Title: Hi-breather frames
Post by: hanksie on January 12, 2001, 11:21:43 AM

Hi guys.split the cases on my 250 and things do not look good! Corrosion in the crank area is to the point of almost being outside the motor and the kicker shaft support that is cast into the case is broke in half right thru the threaded area.If we can not get these problems fixed,will a 175 jackpiner motor and pipe fit my 74 harescrambler frame?Thanks for any help on this,Hanksie.

Title: Hi-breather frames
Post by: Heinz Raidel on January 13, 2001, 08:03:22 PM

one of the more recent POG newsletters has a technique for epoxying case decay. are you a member?

Title: Hi-breather frames
Post by: hanksie on January 23, 2001, 03:53:31 PM

O.K. Back from vaction! Thanks for the reply,Heinz.Yes,I am a member and found newsletter lost in my rubble.We will give it a try and see what happens.

Title: Hi-breather frames
Post by: Mike Lenz on February 07, 2001, 08:43:53 AM

I have some 250 cases that are in the same shape, but the kick start area is okay. They are yours if you can't fix the kicker area. I can be reached [email protected]

Title: Hi-breather frames
Post by: Mike Lenz on February 07, 2001, 08:44:00 AM

I have some 250 cases that are in the same shape, but the kick start area is okay. They are yours if you can't fix the kicker area. I can be reached [email protected]

Penton Owners Group

General Discussion => Penton Talk => Topic started by: hanksie on January 12, 2001, 11:21:43 AM