Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Cal Alexander on June 25, 2020, 05:42:13 PM

Title: Wanted Bing 28mm Carb Slide
Post by: Cal Alexander on June 25, 2020, 05:42:13 PM
Looking for a 28mm Bing Carb Slide. Its the version on the later Bing 84s with the built in choke slide. Al and the Bing Agency are sold out. Carb number is 2/28/100 1

Thanks in advance for any help / leads.
Title: Wanted Bing 28mm Carb Slide
Post by: Dale Fisher on June 26, 2020, 06:29:52 AM
Cal,  If it is the same as used in the 30mm Jake has a listing on Ebay for both 30 and 32mm.

https://www.ebay.com/itm/BING-54-30mm-and-32mm-CARB-SLIDES-SACHS-PENTON-HUSQVARNA-100CC-TO-175CC/274398368677?hash=item3fe36ad3a5:g:laoAAOSwlZNe577A

Dale Fisher

Mudlark Registry
Title: Wanted Bing 28mm Carb Slide
Post by: Larry Perkins on June 26, 2020, 06:52:01 AM
The 28 and 30 are the same.  The older 32 is the same.  The newer 32 had the idle screw in a different position and has a cutout in the side of the slide so it is different.

Larry P
Title: Wanted Bing 28mm Carb Slide
Post by: Cal Alexander on June 26, 2020, 11:42:55 AM
Guys, thanks for the reply. Looks like the slides Jake has are the newer style as described by Larry. They have the notch instead of the beveled edge at the bottom where the idle screw rests so the idle screw will not work properly. Al said that the notched style slide was used on the later Hercules bikes. I'll keep looking. Its amazing how quickly this stuff is disappearing. Guess were not getting any younger :)
Title: Wanted Bing 28mm Carb Slide
Post by: slvrbrdfxr on June 26, 2020, 01:53:12 PM
Cal,
Did you take a look at eBay item 192204419078 during your search ?
Dave McC
Title: Wanted Bing 28mm Carb Slide
Post by: Larry Perkins on June 26, 2020, 06:45:02 PM
Dave,

That is for the Type 53 carb and what Cal needs is for a Type 84.

Larry P
Title: Wanted Bing 28mm Carb Slide
Post by: Cal Alexander on June 27, 2020, 08:59:26 AM
Thanks Dave, I had looked at that one earlier. As Larry indicated its for the older style carb. It also has the square choke slide vs the flat one. There are a couple of parts carbs out there so I may make an offer on one of those if no slides turn up. Thanks again guys for the help.
Title: Wanted Bing 28mm Carb Slide
Post by: Larry Perkins on June 27, 2020, 05:18:19 PM
Cal,
I have a few but use them to rebuild Type 84 carbs. Let me see if I can spare one.  Will let you know by Monday.

Larry P
Title: Wanted Bing 28mm Carb Slide
Post by: Cal Alexander on June 28, 2020, 04:13:32 PM
Thanks Larry, that would be great if you have one to spare. Still looking, just found some NOS choke springs at a good price but still no slides.
Title: Wanted Bing 28mm Carb Slide
Post by: Larry Perkins on June 28, 2020, 05:30:52 PM
I know I have the springs and choke slides.  Will look at slides tomorrow.

Larry P