Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Mike Korgan on November 30, 2020, 03:36:20 PM

Title: motoplat ignitions
Post by: Mike Korgan on November 30, 2020, 03:36:20 PM
Are the Motoplat ignitions the same for 250 and 400? I have a 77 mc5 250 and I want to try a heavier flywheel. I have a good ignition from a 400 but want to make sure it's ok to run before I try it.
Thanks,
Mike
Title: motoplat ignitions
Post by: G Ellis on November 30, 2020, 06:06:14 PM
Yes the same. You can use the 400 flywheel. What are you trying to do?
Title: motoplat ignitions
Post by: Mike Korgan on November 30, 2020, 07:49:16 PM
Trying to tone down the powerband a little bit. I have a PVL on there now.
Title: motoplat ignitions
Post by: G Ellis on December 01, 2020, 05:11:52 PM
Has the motor been apart? Set deck height to .052
Title: motoplat ignitions
Post by: Mike Korgan on December 02, 2020, 01:22:21 PM
It has a fresh rebuild from Kip.
Title: motoplat ignitions
Post by: G Ellis on December 07, 2020, 05:04:41 PM
PVL has a extra weight you can add on the flywheel.
Text only | Text with Images