Print Page - 152 60mm rings

Title: 152 60mm rings
Post by: 242 on May 24, 2021, 02:30:08 PM

I'm in need of a set of rings for a 152cc or 60mm big bore piston. A top ring only will work as I broke the top one. Dave

Title: 152 60mm rings
Post by: Carl Hill on May 26, 2021, 05:37:04 AM

I know I have new pistons. I will check this weekend and see if I have extra rings. Do you have the Wiseco piston? I was told some used a Yamaha piston.

Title: 152 60mm rings
Post by: 242 on May 26, 2021, 03:26:08 PM

Yes I have a wiseco piston. Dave

Title: 152 60mm rings
Post by: Carl Hill on May 28, 2021, 06:52:32 PM

The pistons I have use 2 thin rings. I found a few rings like that but they are slightly larger

Title: 152 60mm rings
Post by: fischercycle on May 29, 2021, 11:54:42 AM

HELLO 242,, I HAVE A FEW WISECO 152 PISTON KITS STILL IN THE BOXES GIVE ME A CALL SUNDAY OR MONDAY 412 999 1143 JAKE

Title: 152 60mm rings
Post by: 242 on June 03, 2021, 11:15:51 AM

Carl how much larger. I could make them fit if not much larger Dave

Title: 152 60mm rings
Post by: 242 on June 03, 2021, 12:30:47 PM

I may have to buy a new one if no luck on rings. On rings, I think most of the wiseco pistons take the same rings just find the right bore. I have an old wiseco 250 YZ Yam piston and the rings will fit the 152 piston just to big, also wisaco 175 rings will fit 152 piston again to large. I have a new 152 piston and a 20 over but no rings. So If any For Sale my Ph # is (812-830-9918) Dave

Title: 152 60mm rings
Post by: Carl Hill on June 04, 2021, 06:20:30 AM

They are not much bigger. I can send you comparison photos if you like.

Title: 152 60mm rings
Post by: 242 on June 12, 2021, 03:41:18 PM

Jake when is a good time to call Dave

Penton Owners Group

General Discussion => Penton Talk => Topic started by: 242 on May 24, 2021, 02:30:08 PM