Print Page - WTB 72 jackpiner intake manifold for bing

Title: WTB 72 jackpiner intake manifold for bing
Post by: juliusalexander on June 07, 2021, 07:50:19 AM

Changing from original Amal to Bing. Have a 84 Bing with 2/30/100 stamping. Looking for the oem manifold that will fit inside the Bing.

Thanks

JR Alexander
Bloomington, IL
72 175 Jackpiner

Title: WTB 72 jackpiner intake manifold for bing
Post by: Mike Lenz on June 07, 2021, 03:24:15 PM

Kip Kern so graciously supplied me with a couple types recently I was looking for...and you need the one I didnt!
[email protected]

Title: WTB 72 jackpiner intake manifold for bing
Post by: Mike Lenz on June 15, 2021, 03:50:27 PM

JR
Never heard from you. Still need. Maybe email went to spam. Whats your email? We live very near each other!
Mike

Title: WTB 72 jackpiner intake manifold for bing
Post by: fischercycle on June 20, 2021, 06:01:56 PM

Hello ,i have 8 nos. manafolds for the penton,,,,center to center long end is 69 to 70mm . short end 22mm 36mm carb end , ,if you guys can use this give me a call, i have about 50 nos, manafolds avil.for other pentons 125cc to 400cc, or let me know, JAKE

Title: WTB 72 jackpiner intake manifold for bing
Post by: Mike Lenz on June 21, 2021, 05:03:24 PM

Thanks Jake. He never responded to me??

Title: WTB 72 jackpiner intake manifold for bing
Post by: juliusalexander on June 23, 2021, 07:27:21 AM

Thanks for the replies. Mike, I did contact Kip as you suggested and he hooked me up. Jake, thanks for the info. Carb is bolted up and runs. Now I just need to fine tune. Cold starting is hugely improved over Amal.

JR Alexander
Bloomington, IL
72 175 Jackpiner

Title: WTB 72 jackpiner intake manifold for bing
Post by: Mike Lenz on June 29, 2021, 12:05:20 PM

JR I live between Bloomington and Peoria!

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: juliusalexander on June 07, 2021, 07:50:19 AM