Anyone know of a person or comapany that builds 2 stroke exhaust systems from scratch? Or, a company that builds all the pieces? I am looking to change out the 180 bend on a 1978 pipe, and also get a transitional cone to mate up to the existing pipe.
1976 250 MC5 Original Owner
1976 Penton 175 XC
Dyno Port used to make some of the best KTM 2-stroke pipes available and used to sell pieces-parts for tuning and repair. Don't know if they still do that? If not maybe they can steer you in the right direction? They're in NY State in the finger lakes area.
https://dynoport.com/
Thanks Mike!
1976 250 MC5 Original Owner
1976 Penton 175 XC
I don't know if Geoff does parts but you may want to check him out at Geoff Morris Concepts (G.M.C.).
http://www.geoffmorrisconcepts.com/
I had George build my YZ465 pipe and he did a nice job. The only thing that was little off was the spring mounts going to the engine. He's in Australia but I found him EZ to work with. You will have to be patient as he has a long lead time for builds. Yes, plan to drop some big coin.
I found a many pipe builders in the states looking for welders and unable to provide decent services.
Pete Petrick
175 Jackpiner
Slow but Good
Mike, I heard back from Rich and he had an interest in helping out. Like most small companies right now, they are extremely busy. He can't look at it until March. Thanks again for your help.
quote]Originally posted by Mike Rosso
Dyno Port used to make some of the best KTM 2-stroke pipes available and used to sell pieces-parts for tuning and repair. Don't know if they still do that? If not maybe they can steer you in the right direction? They're in NY State in the finger lakes area.
https://dynoport.com/
[/quote]
1976 250 MC5 Original Owner
1976 Penton 175 XC