I see we're back in biz here on the message board. I guess you don't know what you've got til it's gone, eh.
So, I'm wondering without calling around, if anyone knows if the black and white striped sticker (apx. 1" wide) that goes over the length of the seam on the top/center of the gas tank (apx.74-77) is available anywhere. Thanks again.
Rob , we got a complet set of stickers for Peters 1975, 175 from Larry . it came with the seam stripe.
can you get the measurements for a stock 400 pipe still?
we can use then in the Library.
Thanks ,
JOhn & Peter
Rob, I have a few if you don't find one. These are new repros.
Thank you John and Kip for your help.
John, yes I should get/save those dimensions, they will be hidden soon when I weld the rear silencer section back on as stock. I am able to regain the stock pipe look (enduro) because I was lucky enough to find a new chrome exhaust tip on ebay. That is one big honk'n pipe for a motorcycle.
I would like a set of the ==PENTON== stripes to put on a new KTM. I think this would be neat. Show our colours !
Dwight Rudder
7 time ISDT / E medalist
7 time National Enduro Class Champion.
Dwight, Contact Jerry at SoCal Decal, They can make anything you want!
Do you happen to know where I can get a gasket set for a "73" Puch 175cc engine rebuild?
http://www.motorwestmotorcycles.com/
Dwight Rudder
7 time ISDT / E medalist
7 time National Enduro Class Champion.