Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Mike Berrington on February 19, 2003, 08:45:21 PM

Title: WANTED: VDO speedo cable
Post by: Mike Berrington on February 19, 2003, 08:45:21 PM
Looking for a cable to fit a drive unit that comes off the front wheel (Jackpiner).

 
Title: WANTED: VDO speedo cable
Post by: Randy Kirkbride on February 20, 2003, 07:53:04 AM
Mike,
There is one on ebay now.  #2404274270
Randy

 
Title: WANTED: VDO speedo cable
Post by: Randy Kirkbride on February 20, 2003, 08:05:14 AM
Well, since I looked at again, I'm not sure if it will work or not. Anyone else know??
Randy

 
Title: WANTED: VDO speedo cable
Post by: Dennis D on February 20, 2003, 08:17:44 PM
Mike, How is the cable retained in the drive that you have on your bike? Dennis

 
Title: WANTED: VDO speedo cable
Post by: Dr.2Stroke on February 20, 2003, 09:12:31 PM
if you have the same drive as the 74 and 75 models have, ihave new NOS cables. Mail me at [email protected]

 
Title: WANTED: VDO speedo cable
Post by: Mike Berrington on February 22, 2003, 02:36:53 PM
The cable slips into the VDO drive casting at the front wheel and is retained by a pinch bolt.  The hole the cable slips into is approximatly 11 mm.  The spedo end is screwed onto the speedo.

Mike Berrington
Waynesboro VA.
Title: WANTED: VDO speedo cable
Post by: Dennis D on February 22, 2003, 09:35:47 PM
Mike, By now you have seen the post in the jersey thread about the cable and drive. If not... You said that you have a pinch bolt. Mine has a bolt that goes through an indentation on the cable to retain it. It doesn't really pinch the cable. Let me know and I'll call a friend of mine that might have something. Dennis D



Edited by - Dennis D on 02/22/2003  9:44:34 PM
Text only | Text with Images