Print Page - penton boneyard

Title: penton boneyard
Post by: Rick/calif on February 27, 2003, 09:40:56 PM

As a new pog member i have not had enough exposure to the group to know who, if anybody, has a good boneyard for early glass tank pentons. Parting out frames,etc. Ant info would be great. thanks, Rick.

Title: penton boneyard
Post by: Larry Perkins on February 28, 2003, 10:47:22 AM

I have alot of used stuff from bikes we have parted out and used parts I have accumulated. I also have a large NOS Sachs/Penton/KTM/DKW/Monark inventory if you need anything.

Title: penton boneyard
Post by: Mike Berrington on February 28, 2003, 08:26:22 PM

Larry: I am looking for the braces that run from the frame (seat/tank junction) down to the base of the cylinder and a front fork brace for a 1973 jackpiner highbreather, do you have either?

Mike Berrington

Mike Berrington
Waynesboro VA.

Title: penton boneyard
Post by: Larry Perkins on March 01, 2003, 07:21:50 AM

Mike,

I have the motor braces used but not the fork brace. E-mail me at [email protected]. I need to know if you want the tubular ones or the alloy ones. I think the tubular ones were stock on that year.

Title: penton boneyard
Post by: Rick/calif on March 01, 2003, 10:38:07 AM

Larry, did you recieve my e-mail about engine struts,etc. My e-mail is temporarily down due to server change. parts for 72 125 six-day

Title: penton boneyard
Post by: Rick/calif on March 12, 2003, 10:40:53 AM

Quotequote:
I have alot of used stuff from bikes we have parted out and used parts I have accumulated. I also have a large NOS Sachs/Penton/KTM/DKW/Monark inventory if you need anything.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Rick/calif on February 27, 2003, 09:40:56 PM