Print Page - Bing Tickler Question

Title: Bing Tickler Question
Post by: Bryan on April 01, 2003, 07:03:19 PM

Anyone know how to remove the tickler assembly from the carb body on the Bing?

Bryan

Title: Bing Tickler Question
Post by: Mike Lenz on April 01, 2003, 09:25:18 PM

You have to grind off the dimple on the bottom of the tickler rod, and flare it out again when replacing.

Title: Bing Tickler Question
Post by: tomale on April 01, 2003, 09:28:12 PM

Bryan, why would you want to?

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

Title: Bing Tickler Question
Post by: Bryan on April 02, 2003, 11:29:05 AM

I've got three old Bings that I'm trying to make into one usable one. So I'm trying to get parts off of one that has a good tickler knob and put it on one that is ok except for the tickler that is sheared off on the top. I've tried to find a replacement for the original carb but can't find a complete one that matches number 2/36/102A.

Title: Bing Tickler Question
Post by: tomale on April 03, 2003, 12:49:05 AM

that makes sense

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Bryan on April 01, 2003, 07:03:19 PM