Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: BJONES on April 23, 2003, 10:26:34 AM

Title: CYL RUBBERS
Post by: BJONES on April 23, 2003, 10:26:34 AM
WHERE CAN I FIND THE CYL. RUBBERS THAT GO THRU THE FINS?

 
Title: CYL RUBBERS
Post by: Randy Kirkbride on April 23, 2003, 12:08:31 PM
BJONES
Back in October, John Durrill had a post saying he used 8mm fuel line he purchased at a BMW dealer. I'm going to have to try the same thing because I have a black Jackpiner engine that someone before me removed all of them.
Randy

 
Title: CYL RUBBERS
Post by: Kip Kern on April 23, 2003, 04:05:54 PM
I use the fuel line trick also.  rub off any print, and use petrol jelly to slide in place.  buy a pvc hose cutter to make real nice straight cuts.  Looks very professional and is cheaper than having a mold made and getting the rubbers reproduced!

 
Title: CYL RUBBERS
Post by: hrbay on April 23, 2003, 09:12:57 PM
Find a local rubber retailer, seal house, industrial supply etc, and buy some large diameter o-ring chord, and chop away. Solid damps mo-ring and you can get neoprene, buna, silicone .... gc

GC
Text only | Text with Images