Print Page - Steel Tank Speedo Question

Title: Steel Tank Speedo Question
Post by: rcrump1 on May 20, 2003, 10:29:40 AM

I finally managed to find a speedometer bracket for my steel tank 125 and had a question about it. The speedo just slips down into the hole but does not seem to be attached to anything. What holds it in place and keeps it from bouncing around? I was thinking about using a large o-ring on the back side but decided I should let the experts tell me what was correct.
Thanks
Richard

Title: Steel Tank Speedo Question
Post by: Kip Kern on May 20, 2003, 12:21:00 PM

There is a neat little bracket that fastens under the speedo and pulls it down into the bracket you have. This little brackets feet push up under the speedometer bracket you have. Kinda looks like a square "U"

Title: Steel Tank Speedo Question
Post by: rcrump1 on May 21, 2003, 10:16:35 AM

Kip;
Thanks for the information. Are these brackets available from Al of Larry or should I try to fabricate something?
Thanks again.
Richard

Title: Steel Tank Speedo Question
Post by: rcrump1 on May 21, 2003, 10:18:15 AM

Oops. Obviously should be "AL or Larry"

Title: Steel Tank Speedo Question
Post by: metalkfab on May 21, 2003, 02:46:14 PM

We are currently reproducing the large bracket for D.W. and Al Buehner.If Al doesn't have the "neat little bracket",I'll be trying to mooch one for repro.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: rcrump1 on May 20, 2003, 10:29:40 AM