Print Page - Fork seal size ??

Title: Fork seal size ??
Post by: slvrbrdfxr on May 25, 2003, 08:21:04 PM

Can someone please tell me what size fork seals are used in a 125 Steel Tank bike ?? I think the I/D is 35mm but need to confirm this and also need to know the O/D and thickness of the seals. Any help would be greatly appreciated !! Please email info to me at [email protected] . Thanks !!

Title: Fork seal size ??
Post by: Doug Wilford on May 25, 2003, 08:59:17 PM

Check the parts guys listed they should have your fork seals. I have even ordered them through the local Honda shop.

Title: Fork seal size ??
Post by: john durrill on May 25, 2003, 10:39:45 PM

clean the old seals up . if you have very good eyes you will see 3 #'s . that is the seal size in mm. look close because sometime they are inside behind the seal lip
I have to use a magnifying glass anymore Chuckle chuckle. Al or larry will have the seals Like Doug said.
John D.

Title: Fork seal size ??
Post by: Kip Kern on May 26, 2003, 09:34:03 PM

CR Seal CR13945 will do it. 4 each

Title: Fork seal size ??
Post by: slvrbrdfxr on May 27, 2003, 10:04:34 PM

Thanks to all for the advise on the seals !! I was able to find some seals locally using the part number supplied by Kip. Thanks again !!

Penton Owners Group

General Discussion => Penton Talk => Topic started by: slvrbrdfxr on May 25, 2003, 08:21:04 PM