Print Page - Need Float Bowl for Lectron Carb

Title: Need Float Bowl for Lectron Carb
Post by: Monty on July 05, 2003, 02:13:30 PM

Dearest Pentonites,

I am in search of a float bowl, in very reasonable condition[/b], to use on my Lectron Carb. The problem I am running into is that Lectron no longer makes the same design float bowl, and if I want a Brand Spankin New One I must send the carb out to them to have it modified. Any help would be greatly appreciated.

Title: Need Float Bowl for Lectron Carb
Post by: Dave Withrow on July 05, 2003, 04:37:24 PM

Hi Monty,
Where do you live? I've got a box full of Lectron stuff(enough for 3-4 carbs). Let me know what all you need. GO PENTON.
Dave

Title: Need Float Bowl for Lectron Carb
Post by: john durrill on July 05, 2003, 08:26:31 PM

Monty,
make sure any float bowl you get is the frosty color, not the clear. the frosty one will take the modern gas with out getting soft. we just added a 32 mm to the 175 , we got it off ebay and it had the wrong float bowl (old style lectron). what we did was use the new one off my 30 mm and got a different float from Al.
Al can set you up with something that will work if Dave dosent have what you need.
John D.

Edited by - john durrill on 07/05/2003 8:27:47 PM

Title: Need Float Bowl for Lectron Carb
Post by: Monty on July 09, 2003, 09:53:57 AM

Dave,

I have tried to e-mail you, but have not gotten a reply back. I live just south of Houston, Texas. As of now, I believe the only thing I need is a float bowl w/ pins in the bottom for the float. Do you have one?

I may need more later, but I'm not sure.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Monty on July 05, 2003, 02:13:30 PM