Print Page - Sachs piston needed

Title: Sachs piston needed
Post by: penton117 on September 18, 2003, 01:45:44 PM

Hi fellow poggers,

I am trying to find a Sachs piston, 54.93mm can anyone help? Also, I have a 55.43mm available, new in the box w/ rings and wrist pin. Thanks guys.

Title: Sachs piston needed
Post by: Kip Kern on September 18, 2003, 10:22:25 PM

Is it for a cast iron cylinder or a aluminum cylinder. There is a difference in pistons.

Title: Sachs piston needed
Post by: Larry Perkins on September 19, 2003, 05:51:55 AM

I think those sizes were made for alloy motors. The closest I have is a 54.75 for the alloy motor.

Title: Sachs piston needed
Post by: imported_n/a on September 19, 2003, 07:49:29 AM

Kip, what is the difference in the pistons for the iron versus the alloy cylinders? Are the pistons for the iron cylinders useable in the alloy cylinders?

Glenn

Title: Sachs piston needed
Post by: penton117 on September 19, 2003, 10:02:01 AM

This is for an alloy cylinder, 1973 model

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: penton117 on September 18, 2003, 01:45:44 PM