Print Page - 76 Penton 250 rod kit needed

Title: 76 Penton 250 rod kit needed
Post by: olsten on March 15, 2001, 02:02:58 AM

I need a 76 250 rod kit, gaskets & seal kit, can anybody help?

Title: 76 Penton 250 rod kit needed
Post by: Heinz Raidel on March 15, 2001, 03:35:21 PM

Al Buehner has the gasket sets, 216.651.6559;

see below

Edited by - heinz raidel on 03/20/2001 9:33:27 PM

Title: 76 Penton 250 rod kit needed
Post by: Heinz Raidel on March 20, 2001, 08:38:47 PM

ok. try [email protected] for the rods.

Applied Industrial Technologies Inc has the M25 bearings (the main bearings) for $42 per at their commercial/industrial user price.

Bearings as most of you know are universal, they are sized by a number, in this case it is M25. Applied had a difficult time finding these, eventually they found them under "magneto bearings". If anyone needs help with sourcing these email me, I'll see what i can do.

Title: 76 Penton 250 rod kit needed
Post by: Heinz Raidel on March 20, 2001, 09:26:49 PM

Applied Industrial Technologies number is 614.272.8700

HR

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: olsten on March 15, 2001, 02:02:58 AM