Print Page - Ceriani HR Forks

Title: Ceriani HR Forks
Post by: imported_n/a on October 13, 2003, 10:34:15 AM

Whatever happened to the Ceriani HR forks that featured adjustable hydraulic damping? I saw an ad in a late '75 Dirt Bike, and wondered if anybody had them or remembered them or if they worked. They were straight-axle 35mm and had the front rib on the sliders.

Glenn

Title: Ceriani HR Forks
Post by: Randy Kirkbride on October 13, 2003, 11:05:28 AM

Hi Glen ,
I have a '75 250 that is in the process of restoration, that has those forks. I'm just now putting new seals in them.

Title: Ceriani HR Forks
Post by: metalkfab on October 13, 2003, 01:10:28 PM

I've got a set of ribbed forks on my 'Piner.Really don't know anything about adjustability,but they sure work smooth.

Title: Ceriani HR Forks
Post by: imported_n/a on October 14, 2003, 08:59:18 AM

Thanks for the info, guys. I just wondered how long Ceriani made this adjustable model. The 35mm magnesium offset axle model did not feature the adjustment, at least not on the two sets I have.

Glenn

Title: Ceriani HR Forks
Post by: metalkfab on October 24, 2003, 02:51:01 PM

The ribbed froks had a valve set #1.844.065 that could be installed that would smooth out the dampening.Just saw a full box at Buehners.

Title: Ceriani HR Forks
Post by: imported_n/a on October 24, 2003, 04:02:22 PM

Thanks, Karl. I'll pick some up.

Glenn

Penton Owners Group

General Discussion => Penton Talk => Topic started by: imported_n/a on October 13, 2003, 10:34:15 AM