Hi guys
I put the Mikuni conversion on my 400GS on hold for a while until I have sorted out the manifold. Until then, the old worn Bing goes back in. What I've noticed is that the needle jet has worn oval and has split down the one side where it's worn thin. Anyone ever see this before?
Despite this it's still a first or second kick starter.......
Regards
david
Quotequote:Originally posted by farmer58za
Hi guys
I put the Mikuni conversion on my 400GS on hold for a while until I have sorted out the manifold. Until then, the old worn Bing goes back in. What I've noticed is that the needle jet has worn oval and has split down the one side where it's worn thin. Anyone ever see this before?
Despite this it's still a first or second kick starter.......
Regards
david
DAVIDO AFRICANO,.....I stock a good amount of Bing spares.If you can give me precise infos what you need for what type of BING I may have it.Speedy World wide service,...----->>>>>>>>
Helmut Clasen
162 Hillcrest Ave
L9H 4Y3
Dundas Ontario Canada
Ph.905-627-5349
[email protected]http://speedy_c.tripod.com