Print Page - Fox Shocks Adjustment

Title: Fox Shocks Adjustment
Post by: El-Viejo on March 29, 2004, 07:52:07 AM

I want to adjust the preload on my 82 KTM GS-250/II
with Fox Shocks.

I know I do it by moving the snap ring but....... I am
wondering if there is a tool or technique for holding the springs
compressed so I can work with the snap ring.

Any help?

Thanks!

Oscar

Title: Fox Shocks Adjustment
Post by: firstturn on March 29, 2004, 09:47:52 AM

Oscar,
There is a tool that looks like someone built, they must of had a plenty of spair time, that is (in my opinion) to bulky. I believe S & W had these tools (man am I dating myself).
What I had built many years ago was a fork looking piece of flat metal that slips between the spring and fits over the rod. Then you just preload the sping by turning it with your hand and it takes the tension off the spring to slip ring area. If you worry about scratching your springs (for show bikes) just put tape on the metal. I had a handle put on the piece of metal so that it looked factory;).

Ron Carbaugh

Title: Fox Shocks Adjustment
Post by: tomale on March 29, 2004, 10:59:03 AM

Hey Ron,
can you post a picture of that? I am just not getting it. It is either that I am not awake or I am too dense.
Thanks.

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

Title: Fox Shocks Adjustment
Post by: El-Viejo on March 29, 2004, 01:31:16 PM

Thom,

I think I get it, but I'll need to go home and look at my shocks before I attest to that.

Thanks Ron - I think I get it. I'll know for sure tonight.

Oscar

Title: Fox Shocks Adjustment
Post by: El-Viejo on March 30, 2004, 07:49:28 AM

Ron,

Thanks a bunch! I couldn't see the forest for the trees. I should have figured that one out on my own. Too much work and not enough sleep I guess. Even at my age, I love learning from the experience of others.

I really appreciate your help. I will make the tool tonight out out "Sea Teak", a marine polymer material also know as "Starboard", that will make it slide well and protect the paint on the springs.

Regards,

Oscar

Title: Fox Shocks Adjustment
Post by: firstturn on March 30, 2004, 08:53:50 AM

Tamale,
I will send you a picture later today. The wheel I have for a 250/400 is broke. So much for being Mr. Good Guy, but I will find another.

Ron Carbaugh

Title: Fox Shocks Adjustment
Post by: firstturn on March 30, 2004, 08:57:22 AM

Oscar,
The best part is that the difference from the factory tools is this idea has no moving parts and fits in the tool box taking up little space[8D].
Thanks for helping out Steve on the 1977 - 125.

Ron Carbaugh

Title: Fox Shocks Adjustment
Post by: tomale on March 30, 2004, 10:29:47 AM

Ron, I will look for the picture tonite when I get home. I have a roof to do and it is raining.....Lot of fun. Thanks for trying on the wheel. It is not like I need it today or anything so when ever is fine. see ya and Thanks my friend.

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

Title: Fox Shocks Adjustment
Post by: El-Viejo on March 31, 2004, 02:45:13 PM

I like no moving parts :D

It was my pleasure to help out Steve. He is going to send me some pics when he gets a chance.

I am still on the hunt for a 125... Something between 1973 to 1975 preferably so it's not too tall. I will continue to keep my eyes and ears open.

Thanks,

Oscar

Title: Fox Shocks Adjustment
Post by: firstturn on March 31, 2004, 04:25:38 PM

Oscar,
E-mail me on what you are looking for in the way of a Penton 125.

[email protected]

Ron Carbaugh

Penton Owners Group

General Discussion => Penton Talk => Topic started by: El-Viejo on March 29, 2004, 07:52:07 AM