Print Page - 250 MC 5 QUESTIONS

Title: 250 MC 5 QUESTIONS
Post by: Rain Man on April 27, 2004, 04:12:19 AM

I'm almost ready to start my 1976 Penton 250 MC5 and don't have an operators manual.Whats the fuel oil ratio? I use synthetic oil and whats the Spark Plug #? I usually use NGK's
Thanks Raymond

Title: 250 MC 5 QUESTIONS
Post by: G Ellis on April 27, 2004, 06:28:03 AM

Rain Man I would try NGK B8HS this is standard I use a NGK B9HS when I am racing this is a little colder plug. As to ratio 50 to 1 Spectrol oil this is the same company that made High Point oil in the day. I use Castrol 927 oil at 60 to 1 runs great and smells good to. Are you going to MID OHIO this year if so hope to meet you. Hope this will help.

Title: 250 MC 5 QUESTIONS
Post by: Rain Man on April 28, 2004, 04:15:34 AM

thanks Gary, just gotta have those 2 items correct, melt downs are imminent:(without that information. I'll see you in Ohio,

Title: 250 MC 5 QUESTIONS
Post by: Lloyd Boland on April 29, 2004, 10:19:39 AM

I use a B8HS. Seems to run fine with good color on plug. Fuel ratio in manual is either 20:1 or 24:1, I'll check tonight. I run 24:1 without any fouling problems, probably a little more smoke. I want to make sure the motor gets enough oil. Any comment on why the manual says 20:1(or 24:1) and so many guys are running 40:1 or 50:1. These are not water cooled motors.

Title: 250 MC 5 QUESTIONS
Post by: Rain Man on April 30, 2004, 04:18:40 AM

Lloyd, I'm not positive but synthetic oil wasen't readily available back when the Pentons first came out.
Raymond

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Rain Man on April 27, 2004, 04:12:19 AM